How do I set up the Mixx Analog Plus Record Player for the first time?

Setting up the Mixx Analog Plus is easy, and because it’s a fully automatic turntable, it handles all the precision bits for you. Here’s how to get started properly.

Check what’s in the box

You should have:

• the Analog Plus turntable with the anti-slip mat and stylus already fitted
• a 45 RPM adapter (kept in the holder beside the platter)
• a regional power adapter
• twin RCA audio cables
• Dust Cover for the Record Player
• a remote control

Have a quick look through the packaging before you throw anything away, just in case something’s tucked into a cardboard sleeve.

We would recommend you keep the packaging to safely store it or to return it for any reason in the future

Choose where to put it

Place the turntable somewhere flat and stable. Avoid direct sunlight, heat sources, wobbly shelves, places that vibrate, and anywhere damp or overly dusty. Give it a sensible, solid home — it’ll perform at its best that way.

Fit the dust cover

Slide the dust cover onto the hinges at the back. They’re intentionally snug, so take your time and let it ease into place.

Remove protective bits

Take off any packaging materials, including the transport clip or tie holding the tonearm. Keep the stylus protector — it’s useful whenever the player isn’t being used.

Power it

Connect the DC power adapter pin to the back of the unit first, then plug the power adapter into the wall.

Please do not use any third-party power adapter, this could potentially damage the record player, hence void the warranty.

Once powered, the Analog Plus always starts in CD mode by default, so don’t worry if you see the CD display light up straight away.

Connect to your speakers

You can use wired or wireless speakers, controlled either from the unit itself or the remote control if you are using a Mixx Silver point speaker— both sets of controls work the same way.

Wired (RCA):
Use the included RCA cables to connect to powered speakers or an amplifier. Match red to red, white to white, and set the RCA/Bluetooth switch on the back to RCA.

Bluetooth:
Flip the RCA/Bluetooth switch to Bluetooth.
The Bluetooth icon on the display will flash.
Put your speaker or headphones into pairing mode — once connected, the icon stops flashing.
Both vinyl and CDs will play through Bluetooth.

Get it ready to play a record

Place your record on the platter.
If it’s a 7-inch single with a large centre hole, use the 45 RPM adapter from its holder.

Select the correct speed with the FN button (33 or 45).
Select the record size with the Size button (12" or 7").
Remove the stylus protector and open the tonearm clip.

Start listening (no manual tonearm movement needed)

Because the Mixx Analog Plus is fully automatic, never move the tonearm by hand.

Just press Play — either on the unit or on the remote. The turntable will:

• lift the tonearm,
• move it into the correct position,
• lower it onto the record,
• and start playback smoothly.

When you’re finished

Press Stop.
The tonearm will automatically lift, return to its rest and settle back into place. If you’re done for the day, pop the stylus protector back on.